Models Specifications for model # TTS481CKA36300 Equipment | | Drive Tires | 16 x 6.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | No battery, recoil start w/ 5 amp clutch coil | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kawasaki® | Engine Model | FS481V | Engine Type | Carbureted | Engine Series | V-Twin | Engine Speed | 3,600 rpm | Engine Displacement | 603 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 105 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | Yes | Fuel Type | Gas Carbureted | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 36" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 2 Blades at 18.00" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 47.5 in. (120.7 cm) | Length | 77.7 in. (197.4 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 573 | Specifications for model # TTS541CKA48300 Equipment | | Drive Tires | 16 x 7.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | No battery, recoil start w/ 5 amp clutch coil | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kawasaki® | Engine Model | FS541V | Engine Type | Carbureted | Engine Series | V-Twin | Engine Speed | 3,600 rpm | Engine Displacement | 603 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 105 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | Yes | Fuel Type | Gas Carbureted | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 48" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 16.25" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 59.5in. (151.1 cm) | Length | 73.7 in. (187.2 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 588 | Specifications for model # TTS541GKA52300 Equipment | | Drive Tires | 16 x 7.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | No battery, recoil start w/ 5 amp clutch coil | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kawasaki® | Engine Model | FS541V | Engine Type | Carbureted | Engine Series | V-Twin | Engine Speed | 3,600 rpm | Engine Displacement | 603 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 105 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | No | Fuel Type | Gas Carbureted | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 52" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 18.00" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 64.3 in. (163.3 cm) | Length | 75.9 in. (192.8 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 670 | Specifications for model # TTS600GKA483E0 Equipment | | Drive Tires | 16 x 7.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | 12-volt battery with 15-amp alternator. | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kawasaki® | Engine Model | FS600V | Engine Type | Carbureted | Engine Series | V-Twin | Engine Speed | 3,600 rpm | Engine Displacement | 603 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 105 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | No | Fuel Type | Gas Carbureted | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 48" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 16.25" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 59.5in. (151.1 cm) | Length | 73.7 in. (187.2 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 606 | Specifications for model # TTS600GKA523E0 Equipment | | Drive Tires | 16 x 7.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | 12-volt battery with 15-amp alternator. | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kawasaki® | Engine Model | FS600V | Engine Type | Carbureted | Engine Series | V-Twin | Engine Speed | 3,600 rpm | Engine Displacement | 603 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 105 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | No | Fuel Type | Gas Carbureted | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 52" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 18.00" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 64.3 in. (163.3 cm) | Length | 75.9 in. (192.8 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 690 | Specifications for model # TTS680PKC483E0 Equipment | | Drive Tires | 16 x 7.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | 12-volt battery with 15-amp alternator. | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kohler® | Engine Model | PCV680 | Engine Type | EFI Propane | Engine Series | Command™ EFI | Engine Speed | 3,600 rpm | Engine Displacement | 674 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 125 ft-lbs clutch. | Fuel Capacity | 33.5-lb propane tank | Fuel Indicator | Yes - Float Gauge | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | Yes | Fuel Type | Propane EFI | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 48" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 16.25" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 59.5in. (151.1 cm) | Length | 73.7 in. (187.2 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 741 | Specifications for model # TTX650EKC60400 Equipment | | Drive Tires | 18 x 8.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 11 x 4.0-5, smooth tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | 12-volt battery with 20-amp alternator. | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse. | Engine Brand | Kohler® | Engine Model | ECV650 | Engine Type | Electronic Fuel Injected | Air Filter | Heavy-duty canister air filtration system | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts. | PTO Engagement | Electromagnetic 200 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Fuel Type | Gas EFI | Decks | | Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 60" | Cutting Heights | 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 20.5" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 73.0 in. | Length | 84.8 in. | Height | 45.0 in. | Curb Weight | 760 | Specifications for model # TTX650EKC604N0 Equipment | | Drive Tires | 18 x 8.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 11 x 4.0-5, smooth tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | 12-volt battery with 20-amp alternator. | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse. | Engine Brand | Kohler® | Engine Model | ECV650 | Engine Type | Electronic Fuel Injected | Engine Series | Command™ EFI | Engine Speed | 3,600 rpm | Engine Displacement | 694 | Air Filter | Heavy-duty canister air filtration system | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54cm) tapered shafts. | PTO Engagement | Electromagnetic 200 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | No | Fuel Type | Gas EFI | Decks | | Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 60" | Cutting Heights | 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 20.5" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 72.0 in. (182.96 cm) | Length | 104.8 in. (266.2 cm) | Height | 45.0 in. (114.3 cm) | Curb Weight | 840 | Specifications for model # TTS481GKA48300 Equipment | | Drive Tires | 16 x 7.5-8, 4-ply Turf Master® | Drive Wheel Release | Allows unit movement without engine running. | Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Casters | .38" thick caster yoke arms | Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. | Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. | Parking Brake | Lever-actuated mechanical compression. | Electrical | No battery, recoil start w/ 5 amp clutch coil | Cup Holder | No | Power Components | | Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. | Engine Brand | Kawasaki® | Engine Model | FS481V | Engine Type | Carbureted | Engine Series | V-Twin | Engine Speed | 3,600 rpm | Engine Displacement | 603 | Air Filter | Standard Engine Manufacturer's air filter | Drive | Hydro-Drive | Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. | PTO Engagement | Electromagnetic 105 ft-lbs clutch. | Fuel Capacity | 5-gallon (18.9-L) fuel tank. | Fuel Indicator | None | Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. | Carb Compliant | No | Fuel Type | Gas Carbureted | Decks | | Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. | Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. | Deck Style | Floating Deck | Width / Cutting Deck | 48" | Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | Blades | 3 Blades at 16.25" Length | Blade Tip Speed | Approximately 18,500 fpm. | Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Dimensions | | Width | 59.5in. (151.1 cm) | Length | 73.7 in. (187.2 cm) | Height | 42.0 in. (106.7 cm) | Curb Weight | 586 | |