(205) 621-9161

Exmark Radius X-Series

Exmark Radius X-Series

Models

  • Specifications for model # RAX651GKA484A3

    Equipment
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
    Drive Tires 24 x 9.5-12 K500
    Cup Holder Standard
    Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
    Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
    Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
    Parking Brake Lever-actuated pawl brake.
    Seat Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
    Electrical 12-volt battery with 15-amp alternator.
    Power Components
    Engine Brand Kawasaki®
    Engine Model FX651V
    Engine Displacement 726
    Engine Series V-Twin
    Engine Type Carbureted
    Engine Speed 3,700 rpm
    Air Filter Cyclonic Air Cleaner
    Fuel Type Gas Carbureted
    Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
    Fuel Indicator Translucent Visual
    Drive Hydro-Drive
    Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
    Speed Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–6.0 mph (9.7kmph) reverse.
    Carb Compliant No
    Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    ROPS 2-post foldable ROPS standard with seat belt and latch.
    PTO Engagement MagStop electromagnetic 120-ft-lb clutch
    Drive Wheel Release Allows unit movement without engine running.
    Casters .375" thick caster yoke arms
    Decks
    Width / Cutting Deck 48"
    Deck Style Floating Deck
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
    Blade Tip Speed Approximately 18,500 fpm.
    Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
    Blades 3 Blades at 16.25" Length
    Dimensions
    Width 59.5 in (151.1 cm)
    Length 81.7 in (207.5 cm)
    Height 70.4 inches (178.8 cm)
    Curb Weight 937
  • Specifications for model # RAX691GKA524A3

    Equipment
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
    Drive Tires 24 x 9.5-12 K500
    Cup Holder Standard
    Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
    Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
    Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
    Parking Brake Lever-actuated pawl brake.
    Seat Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
    Electrical 12-volt battery with 15-amp alternator.
    Power Components
    Engine Brand Kawasaki®
    Engine Model FX691V
    Engine Displacement 726
    Engine Series V-Twin
    Engine Type Carbureted
    Engine Speed 3,700 rpm
    Air Filter Cyclonic Air Cleaner
    Fuel Type Gas Carbureted
    Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
    Fuel Indicator Translucent Visual
    Drive Hydro-Drive
    Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
    Speed Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–6.0 mph (9.7kmph) reverse.
    Carb Compliant No
    Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    ROPS 2-post foldable ROPS standard with seat belt and latch.
    PTO Engagement MagStop electromagnetic 120-ft-lb clutch
    Drive Wheel Release Allows unit movement without engine running.
    Casters .375" thick caster yoke arms
    Decks
    Width / Cutting Deck 52"
    Deck Style Floating Deck
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
    Blade Tip Speed Approximately 18,500 fpm.
    Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
    Blades 3 Blades at 18.00" Length
    Dimensions
    Width 64.6 in (164.1 cm)
    Length 81.7 in (207.5 cm)
    Height 70.4 inches (178.8 cm)
    Curb Weight 957
  • Specifications for model # RAX730GKA604A3

    Equipment
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
    Drive Tires 24 x 10.5-12 K500
    Cup Holder Standard
    Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
    Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
    Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
    Parking Brake Lever-actuated pawl brake.
    Seat Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
    Electrical 12-volt battery with 15-amp alternator.
    Power Components
    Engine Brand Kawasaki®
    Engine Model FX730V
    Engine Displacement 726
    Engine Series V-Twin
    Engine Type Carbureted
    Engine Speed 3,700 rpm
    Air Filter Cyclonic Air Cleaner
    Fuel Type Gas Carbureted
    Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
    Fuel Indicator Translucent Visual
    Drive Hydro-Drive
    Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
    Speed Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–6.0 mph (9.7kmph) reverse.
    Carb Compliant No
    Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    ROPS 2-post foldable ROPS standard with seat belt and latch.
    PTO Engagement MagStop electromagnetic 120-ft-lb clutch
    Drive Wheel Release Allows unit movement without engine running.
    Casters .375" thick caster yoke arms
    Decks
    Width / Cutting Deck 60"
    Deck Style Floating Deck
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
    Blade Tip Speed Approximately 18,500 fpm.
    Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
    Blades 3 Blades at 20.50" Length
    Dimensions
    Width 72.7 in (184.7 cm)
    Length 82.2 in (208.8 cm)
    Height 70.4 inches (178.8 cm)
    Curb Weight 1006

Gallery:

Exmark Radius X-Series