(205) 621-9161

Exmark Lazer Z E-Series Suspension

Exmark Lazer Z E-Series Suspension

Unmatched comfort and value with performance that is pure Lazer Z.

If you're looking for industry-leading comfort, commercial-grade quality and the productivity of a Lazer Z combined with mind-blowing value, you’ve found it. The Lazer Z E-Series Suspension uses the same heavy-duty welded tubular steel unibody frame as the entire Lazer Z line, with our new suspended operator platform to significantly reduce the impact of bumps and vibration on productivity. With three easy to adjust coil-over hydraulic dampers, it provides 3.6 inches of travel in vertical and fore-aft directions. Trailing arms limit lateral travel and increase operator stability. A new seat includes numerous comfort enhancing technologies, including our patented Iso-Mount seat isolation system offering up to ¾-inch of lateral and ½-inch of vertical isolation. Patented Elastomeric Vibration Control (EVC) stretch fabric and plush foam padding deliver up to 1.25 inches of additional vertical compliance to maximize comfort and enhance the long-term productivity of the operator.

Models

  • Specifications for model # LZE730GKA524B2

    Equipment
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Drive Tires 23 x 9.50-12, 4 ply Super Turf®
    Cup Holder Standard
    Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
    Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
    Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated disc brake.
    Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
    Electrical 12-volt battery with 20-amp alternator.
    Power Components
    Engine Brand Kawasaki®
    Engine Model FX730V
    Engine Displacement 726
    Engine Series V-Twin
    Engine Type Carbureted
    Engine Speed 3,750 rpm
    Air Filter Heavy-duty canister air filtration system
    Fuel Type Gas Carbureted
    Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
    Fuel Indicator Yes - electronic Sender
    Drive Hydro-Drive
    Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
    Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
    Carb Compliant No
    Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    ROPS 2-post foldable ROPS standard with seat belt and latch.
    PTO Engagement MagStop Electromagnetic 175 ft-lb clutch with spot brake
    Drive Wheel Release Allows unit movement without engine running.
    Casters .50" thick caster yoke arms.
    Decks
    Width / Cutting Deck 52"
    Deck Style Floating Deck
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    Blade Tip Speed Approximately 18,500 fpm.
    Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
    Blades 3 Blades at 18.0" Length
    Dimensions
    Width 64.8 in. (164.6 cm)
    Length 70 in. (177.8 cm)
    Height 70 in. (177.8 cm)
    Curb Weight 1175
  • Specifications for model # LZE801GKA604B1

    Equipment
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Drive Tires 24 x 12-12, 4 ply Super Turf®
    Cup Holder Standard
    Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
    Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
    Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated disc brake.
    Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
    Electrical 12-volt battery with 15-amp alternator.
    Power Components
    Engine Brand Kawasaki®
    Engine Model FX801V
    Engine Displacement 852
    Engine Series V-Twin
    Engine Type Carbureted
    Engine Speed 3,750 rpm
    Air Filter Heavy-duty canister air filtration system
    Fuel Type Gas Carbureted
    Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
    Fuel Indicator Yes - electronic Sender
    Drive Hydro-Drive
    Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
    Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
    Carb Compliant No
    Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    ROPS 2-post foldable ROPS standard with seat belt and latch.
    PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
    Drive Wheel Release Allows unit movement without engine running.
    Casters .50" thick caster yoke arms.
    Decks
    Width / Cutting Deck 60"
    Deck Style Floating Deck
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    Blade Tip Speed Approximately 18,500 fpm.
    Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
    Blades 3 Blades at 20.50" Length
    Dimensions
    Width 72.8 in. (184.9 cm)
    Length 83.1 in. (211.1 cm)
    Height 70 in. (177.8 cm)
    Curb Weight 1250
  • Specifications for model # LZE742GKC604B1

    Equipment
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Drive Tires 24 x 12-12, 4 ply Super Turf®
    Cup Holder Standard
    Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
    Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
    Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated disc brake.
    Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
    Electrical 12-volt battery with 15-amp alternator.
    Power Components
    Engine Brand Kohler®
    Engine Model CV742
    Engine Displacement 747
    Engine Series Command™
    Engine Type Carbureted
    Engine Speed 3,750 rpm
    Air Filter Heavy-duty canister air filtration system
    Fuel Type Gas Carbureted
    Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
    Fuel Indicator Yes - electronic Sender
    Drive Hydro-Drive
    Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
    Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
    Carb Compliant No
    Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    ROPS 2-post foldable ROPS standard with seat belt and latch.
    PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
    Drive Wheel Release Allows unit movement without engine running.
    Casters .50" thick caster yoke arms.
    Decks
    Width / Cutting Deck 60"
    Deck Style Floating Deck
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    Blade Tip Speed Approximately 18,500 fpm.
    Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
    Blades 3 Blades at 20.50" Length
    Dimensions
    Width 72.8 in. (184.9 cm)
    Length 83.1 in. (211.1 cm)
    Height 70 in. (177.8 cm)
    Curb Weight 1157

Gallery:

Exmark Lazer Z E-Series Suspension

About the Maker

Exmark

Exmark

Exmark is known to professional landscapers everywhere for our simple, low-maintenance machines designed to provide years of worry-free operation. Cut after cut, lawn after lawn, season after season. Legally, we can't say our mowers last forever. But, a lot of our owners will tell you -- they almost do.