(205) 621-9161

Exmark Turf Tracer S-Series

Exmark Turf Tracer S-Series

Made-to-order performance in a floating-deck, hydro-drive mower.

With the Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks ranging from 36 to 52 inches. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.

Models

  • Specifications for model # TTS481CKA36300

    Equipment
    Drive Tires 16 x 6.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical No battery, recoil start w/ 5 amp clutch coil
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kawasaki®
    Engine Model FS481V
    Engine Type Carbureted
    Engine Series V-Twin
    Engine Speed 3,600 rpm
    Engine Displacement 603
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 105 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant Yes
    Fuel Type Gas Carbureted
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 36"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 2 Blades at 18.00" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 47.5 in. (120.7 cm)
    Length 77.7 in. (197.4 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 573
  • Specifications for model # TTS541CKA48300

    Equipment
    Drive Tires 16 x 7.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical No battery, recoil start w/ 5 amp clutch coil
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kawasaki®
    Engine Model FS541V
    Engine Type Carbureted
    Engine Series V-Twin
    Engine Speed 3,600 rpm
    Engine Displacement 603
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 105 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant Yes
    Fuel Type Gas Carbureted
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 48"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 16.25" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 59.5in. (151.1 cm)
    Length 73.7 in. (187.2 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 588
  • Specifications for model # TTS541GKA52300

    Equipment
    Drive Tires 16 x 7.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical No battery, recoil start w/ 5 amp clutch coil
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kawasaki®
    Engine Model FS541V
    Engine Type Carbureted
    Engine Series V-Twin
    Engine Speed 3,600 rpm
    Engine Displacement 603
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 105 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant No
    Fuel Type Gas Carbureted
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 52"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 18.00" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 64.3 in. (163.3 cm)
    Length 75.9 in. (192.8 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 670
  • Specifications for model # TTS600GKA483E0

    Equipment
    Drive Tires 16 x 7.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical 12-volt battery with 15-amp alternator.
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kawasaki®
    Engine Model FS600V
    Engine Type Carbureted
    Engine Series V-Twin
    Engine Speed 3,600 rpm
    Engine Displacement 603
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 105 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant No
    Fuel Type Gas Carbureted
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 48"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 16.25" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 59.5in. (151.1 cm)
    Length 73.7 in. (187.2 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 606
  • Specifications for model # TTS600GKA523E0

    Equipment
    Drive Tires 16 x 7.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical 12-volt battery with 15-amp alternator.
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kawasaki®
    Engine Model FS600V
    Engine Type Carbureted
    Engine Series V-Twin
    Engine Speed 3,600 rpm
    Engine Displacement 603
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 105 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant No
    Fuel Type Gas Carbureted
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 52"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 18.00" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 64.3 in. (163.3 cm)
    Length 75.9 in. (192.8 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 690
  • Specifications for model # TTS680PKC483E0

    Equipment
    Drive Tires 16 x 7.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical 12-volt battery with 15-amp alternator.
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kohler®
    Engine Model PCV680
    Engine Type EFI Propane
    Engine Series Command™ EFI
    Engine Speed 3,600 rpm
    Engine Displacement 674
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 125 ft-lbs clutch.
    Fuel Capacity 33.5-lb propane tank
    Fuel Indicator Yes - Float Gauge
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant Yes
    Fuel Type Propane EFI
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 48"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 16.25" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 59.5in. (151.1 cm)
    Length 73.7 in. (187.2 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 741
  • Specifications for model # TTX650EKC60400

    Equipment
    Drive Tires 18 x 8.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 11 x 4.0-5, smooth tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical 12-volt battery with 20-amp alternator.
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
    Engine Brand Kohler®
    Engine Model ECV650
    Engine Type Electronic Fuel Injected
    Air Filter Heavy-duty canister air filtration system
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts.
    PTO Engagement Electromagnetic 200 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Fuel Type Gas EFI
    Decks
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 60"
    Cutting Heights 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 20.5" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 73.0 in.
    Length 84.8 in.
    Height 45.0 in.
    Curb Weight 760
  • Specifications for model # TTX650EKC604N0

    Equipment
    Drive Tires 18 x 8.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 11 x 4.0-5, smooth tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical 12-volt battery with 20-amp alternator.
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
    Engine Brand Kohler®
    Engine Model ECV650
    Engine Type Electronic Fuel Injected
    Engine Series Command™ EFI
    Engine Speed 3,600 rpm
    Engine Displacement 694
    Air Filter Heavy-duty canister air filtration system
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54cm) tapered shafts.
    PTO Engagement Electromagnetic 200 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant No
    Fuel Type Gas EFI
    Decks
    Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 60"
    Cutting Heights 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 20.5" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 72.0 in. (182.96 cm)
    Length 104.8 in. (266.2 cm)
    Height 45.0 in. (114.3 cm)
    Curb Weight 840
  • Specifications for model # TTS481GKA48300

    Equipment
    Drive Tires 16 x 7.5-8, 4-ply Turf Master®
    Drive Wheel Release Allows unit movement without engine running.
    Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
    Casters .38" thick caster yoke arms
    Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
    Parking Brake Lever-actuated mechanical compression.
    Electrical No battery, recoil start w/ 5 amp clutch coil
    Cup Holder No
    Power Components
    Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
    Engine Brand Kawasaki®
    Engine Model FS481V
    Engine Type Carbureted
    Engine Series V-Twin
    Engine Speed 3,600 rpm
    Engine Displacement 603
    Air Filter Standard Engine Manufacturer's air filter
    Drive Hydro-Drive
    Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
    PTO Engagement Electromagnetic 105 ft-lbs clutch.
    Fuel Capacity 5-gallon (18.9-L) fuel tank.
    Fuel Indicator None
    Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
    Carb Compliant No
    Fuel Type Gas Carbureted
    Decks
    Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
    Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
    Deck Style Floating Deck
    Width / Cutting Deck 48"
    Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
    Blades 3 Blades at 16.25" Length
    Blade Tip Speed Approximately 18,500 fpm.
    Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    Dimensions
    Width 59.5in. (151.1 cm)
    Length 73.7 in. (187.2 cm)
    Height 42.0 in. (106.7 cm)
    Curb Weight 586

Gallery:

Exmark Turf Tracer S-Series

About the Maker

Exmark

Exmark

Exmark is known to professional landscapers everywhere for our simple, low-maintenance machines designed to provide years of worry-free operation. Cut after cut, lawn after lawn, season after season. Legally, we can't say our mowers last forever. But, a lot of our owners will tell you -- they almost do.